Home > IR Convolvers > IR loaders [Enables to load your own IR] > AMT Pangeae CP-100

AMT Pangeae CP-100

Tuesday 28 January 2020

  • Nominal input level: -10dBV(0.316Vrms)
  • Level of input signal clipping, (no less): +3dBV (1.42Vrms)
  • Output signal level, when (input signal -10dBV, IR,EQ,RM are OFF, Volume 31)
  • Working mode 1 (Headphones output, stereo): –2dBu(0.615Vrms)
  • Working mode 2 (line output, stereo): -10dBV(0.314Vrms)
  • Working mode 3 (balanced output, mono): +4bBu(1.23Vrms)
  • Volume regulation step: approx. 0,7dB
  • Attenuator’s input signal positions: 0dB, -24dB, -28dB, -32dB, -36dB, -40dB
  • Analog onboard gain: yes fixed.[Read the schematic of the PCB version)
  • IR file’s type: wav, 24-bits, 48kS/sec
  • Latency: 1.2msec
  • IR file truncation: 20.5msec
  • Power supply: 12VDC, 100mA
  • Size: 30*43*96(mm)
  • Weight: 180g This is an IR loader pedal: You can not capture your own guitar IR with it. You must download IR from a website (like this one), ask us to make it, or make it using an open-source algorithm like JonFields45’s.
If you like this website, please donate to support it.