Home > IR Convolvers > IR loaders [Enables to load your own IR] > Nux solid studio NSS-5
Nux solid studio NSS-5
Tuesday 28 January 2020
WARNING: The NSS-5 captures loudspeakers IRs not acoustic guitars.
- 6.35mm mono input with input signal level toggle switch (-10dB / +4dB).
- (TRS) STEREO OUTPUT and DI OUT
- The Solid Studio’s IR resolution is 2048 samples and 46ms.
- Signal latency from input to output is less than 1ms
- Sampling frequency 88.2 KHz
- A/D resolution 32 bit
- Resolution 32 bit (DSP?)
- Frequency Response: 20Hz-20kHz +/-0.5dB
- Noise level: -100dBu (A-weighted)
- Dynamic Range: 100dB
- Current Draw: <240 mA
- Power Supply: 9V DC, Negative tip
- Maximum input level: +18dB
- Maximum output level: -20dB
- Latency: 0.7ms
- Dimensions: 105(L)mmx115(W)mmx58(H)mm
- Weight:428g
I measured around 1 Mohm input
Note that both pots + the mic position 3 positions pot browse IRs.
So you can load 8x8x3 IR files.
Implementing blend is not "easy" because of the internal normalization of the IRs.
There is no EQ power.
This is an IR loader pedal: You can not capture your own guitar IR with it. You must download IR from a website (like this one), ask us to make it, or make it using an open-source algorithm like JonFields45’s.