Home > IR Convolvers > IR loaders [Enables to load your own IR] > A+ CabZone LE

A+ CabZone LE

Saturday 15 February 2020

Key Features

Simple and intuitive controls
10 stock impulses (8 for guitar and 2 for bass)
A microSD card slot that allows to upload up to 10 custom impulses
The THRU output for the unprocessed signal allows for extra monitoring or recording
Compact and pedalboard-friendly: enclosure size is 69х95х36mm (2.7x3.7x1.4”)
An AUX input and a headphones output
Works with power supply units in the 9–18V DC range
Affordable price

Connectivity

IN — instrument-level input with switchable INST or LINE attenuation (0dB or -6dB)
THRU — unprocessed parallel output that duplicates the signal from the IN jack
OUT — main unbalanced output to go into the mixer or powered speakers
AUX — input for external audio (the signal from the AUX input only goes to the headphones output)
PHONES — headphones output
POWER IN — power supply input (9–18V DC 80mA)
microSD — microSD card slot

Controls

The CABINET knob selects the impulse
The VOLUME knob controls the volume of the OUT and PHONES outputs
The PAD switch selects between INST and LINE input attenuation (0dB and -6dB)

There is no bypass switch. The bypass is digital and is engaged when the CABINET knob is set to OFF.

Impulse Upload from MicroSD Card
A FAT32-formatted microSD card is required for impulse upload.

When the microSD card is used for the first time, an AFX folder with stock impulse files is automatically created on it. The files are stored in subfolders corresponding to the CABINET knob positions. To use custom impulses, replace the stock files with your own.

Impulse format: .wav mono 24bit 48kHz WAVE PCM1, uncompressed. Impulse length: 940 samples (19.58ms). You can upload longer impulses but only the first 940 samples will be used.

To re-record the stock impulse files to a microSD card, insert a blank card into the device. This will automatically create an AFX folder and all its contents. If there is no card in the microSD slot, the stock impulses (stored in the device’s memory) are used.
Specifications

Power supply: 9-18V DC 80mA, negative tip, 2.1/5.5mm jack. The device cannot be powered by battery. Use a regulated PSU only.
Dimensions (LхWхH): 69х95х36mm (2.7x3.7x1.4”)
Weight: 140g (0.3lb)

This is an IR loader pedal: You can not capture your own guitar IR with it. You must download IR from a website (like this one), ask us to make it, or make it using an open-source algorithm like JonFields45’s.

If you like this website, please donate to support it.